Wednesday, August 19, 2015

Unizor - Geometry3D - Problems on Similarity





Unizor - Creative Minds through Art of Mathematics - Math4Teens

Problems on
Similarity in 3-D Space

1. Prove that all cubes are similar.

2. Prove that all regular tetrahedrons are similar.

3. Prove that all spheres are similar.

4. Consider a sphere inscribed into a cube of a unit size. It takes up certain volume in the cube, while certain part of a cube's volume remains free.
Now let's take this sphere out from a cube, take certain number of spheres with a diameter equaled to 1/Nth of the original sphere and fill the cube with these smaller spheres positioning these spheres in rows, columns and layers, one strictly above the other. They will also take up some space, while certain part of a cube's volume will remain free.
In which of these cases the free part of a cube will be larger by volume?

5. Consider two persons drinking martini from the same conical glasses. One takes the glass filled with martini to the brim, while another said to a barman that she wants only half a glass. Barman fills her glass to half its height. How much martini is in this glass relatively to a full glass of her partner?

6. Specify requirements for two right rectangular prisms that assure their similarity.

Tuesday, August 18, 2015

Unizor - Geometry3D - 3D Similarity









Unizor - Creative Minds through Art of Mathematics - Math4Teens

3-D Similarity

The definition of scaling or homothety in three-dimensional space is exactly the same as on a plane. The transformation of scaling requires the center of scaling (a point in a space) and the factor of scaling (non-zero real number) with exactly the same functionality as on a plane.

Assume, point X is a center of scaling and f is a factor of scaling. Any point M in a space not coinciding with the center X is transformed by a scaling using the following procedure (exactly as on a plane):
(a) connect points M (given) and X (center) by a segment;
(b) construct a new segment with the length equal to the length of XM multiplied by an absolute value of the factor |f|;
(c) starting at the center X along the line XM position this new segment in the direction from X to M for positive factor f or to an opposite direction for negative f;
(d) the end of this new segment is the result of transformation of point M by scaling with center X and factor f.
If point M coincides with center X, scaling with any factor does not change its position since the length of a segment XM is zero and will be zero after multiplication by any factor.

The most important property of scaling with factor f is the fact of changing of the length of any segment MN into another M'N' with the length that is equal to a product of the length of the original segment and factor |f|, regardless of a center of scaling X. This simple fact follows from the similarity on a plane of triangles ΔXMN and ΔXM'N'.

Now, with scaling transformation defined, we can define similarity of two geometrical objects ξ and η in three-dimensional space as the possibility to transform one into another using scaling, as defined above, optionally combined with congruent transformations of parallel shift (translation), rotation and symmetry. The word "possibility" means here the existence of a particular point X in space that can be used as a center of scaling and a particular non-zero factor of scaling f that, if used in the scaling of object ξ, transform this object into another, congruent to object η.

The three-dimensional expansion of this statement is that the scaling of a plane in three-dimensional space is a plane parallel to the original. To prove it, it's sufficient to choose any two intersecting lines on the original plane and compare them with their counterparts on the resulting plane. Since these lines are correspondingly parallel, the planes they belong to are parallel as well.

Dihedral angles are also preserved by scaling since they are measured by angles between two lines, correspondingly belonging to two planes and perpendicular to a line of their intersection, and the angles between lines are preserved.

It's easy to prove (admittedly, not absolutely rigorously since we do not use the full power of the theory of limits) that scaling of any polygon by a factor f effects its area by a factor f².

It can also be proven (admittedly, not absolutely rigorously since we did not use the full power of the theory of limits) that scaling of any polyhedron by a factor f effects its volume by a factor |f|³.

Unizor - Geometry3D - Prisms - Problems





Unizor - Creative Minds through Art of Mathematics - Math4Teens

Problem 1
Calculate a volume V and the total surface area S of a cube ABCDA'B'C'D', if the length of its main diagonal AC' equals to d.

Answer:
V = d³·√3/9
S = 2d²

Problem 2
Calculate a volume V and the total surface area S of a right regular hexagonal prism with all edges of the same length d.

Answer:
V = 3√3d³/2
S = 3d²(√3+2)

Problem 3
Prove that the area of a square with a side equal to a main diagonal of a right rectangular parallelepiped is greater than or equals to a half of this parallelepiped's total surface, and equality takes place only if this parallelepiped is a cube.

Hint:
Use inequality
x²+y² ≥ 2xy

Problem 4
Prove that the total area of all side faces of any prism (not necessarily the right one) equals to the length of a side edge multiplied by a perimeter of a polygon obtained by cutting the prism by a plane perpendicular to a side edge.

Hint:
Side face is a parallelogram, the area of which equals to a product of a side edge by its altitude.

Problem 5
Given a slanted triangular prism ABCA'B'C' with an isosceles triangle ΔABC as its base, AB=AC.
Side edge AA' forms equal acute angles with base edges AB and AC, that is
∠AA'B = ∠AA'C.
Prove that AA'⊥BC and, consequently, that side face BCC'B' is a rectangle.

Hint:
Prove first the following two simple theorems.
If projection p of line d onto plane γ is perpendicular to some line q on this plane, then the original line d is also perpendicular to line q.
Similarly, if original line d is perpendicular to line q lying on plane γ, then projection p of line d onto this plane γ is also perpendicular to line q.
Symbolically:
p=Projγ(d); q∈γ; p⊥q
⇒ d⊥q
p=Projγ(d); q∈γ; d⊥q
⇒ p⊥q

Monday, August 3, 2015

Unizor - Geometry3D - Prisms - Polygonal Prism





Unizor - Creative Minds through Art of Mathematics - Math4Teens

A prism with any polygon as its directrix is called a polygonal prism.
Triangular prisms and parallelepipeds are particular cases of polygonal prisms. So are pentagonal (pentagon as a directrix) and hexagonal (hexagon as a directrix) prisms.

According to a mini-theorem proven about all prisms, the upper and lower bases of a polygonal prism are congruent polygons and the side faces are parallelograms.

Obviously, we can talk about right polygonal prism if all the side edges are perpendicular to bases.

Of particular interest is the volume of a polygonal prism. To approach this problem, we will perform the following its transformation.

Assume we have a pentagonal prism with a lower base ABCDE and an upper base A'B'C'D'E' (any other polygonal prism can be addressed similarly). Let's break it into a combination of three triangular prisms by cutting it vertically with planes ACC'A' and ADD'A'. The three triangular prisms are: ABCA'B'C',
ACDA'C'D' and
ADEA'D'E'.
All three triangular prisms have the same altitude H - the distance between the two base planes. The volume Vol of each of them equals to a product of the area of a base S and an altitude:
VolABC = SABC·H
VolACD = SACD·H
VolADE = SADE·H

Summarizing the three equations above, we obtain the volume of an entire prism:
Vol = (SABC+SACD+SADE)·H
But the expression in parenthesis constitutes the area of a polygon of the base of this prism. Therefore, our formula for the volume of any polygonal prism is still the same - product of the area of the base and the altitude:
Vol = S·H

Let's do some counting now.
Assume we are dealing with a polygonal prism with an N-sided polygon as the directrix.
The number of vertices is:
V=N+N=2N.
The number of edges is:
E=N+N+N=3N.
The number of faces is:
F=N+2
Let's check the Euler's formula V+F-E=2 that we mentioned in one of the introductory lectures about polyhedrons:
2N+N+2−3N=2
So, the formula holds, as expected.

Unizor - Geometry3D - Prisms - Triangular Prism





Unizor - Creative Minds through Art of Mathematics - Math4Teens

A prism with a triangle as its directrix is called a triangular prism.

According to a mini-theorem proven about all prisms, the upper and lower bases of a triangular prism are congruent triangles and the side faces are parallelograms.

Obviously, we can talk about right triangular prism if all the side edges are perpendicular to bases.

Of particular interest is the volume of a triangular prism. To approach this problem, we will perform the following transformation of a triangular prism.

Assume we have a triangular prism with a lower base ABC and an upper base A'B'C'. All side faces are parallelograms, including BCC'B'. In that parallelogram we choose a point of intersection of its diagonals
P=BC'∩B'C.

Now let's use this point P as a center of symmetry and reflect each vertex of our triangular prism relatively to this center. That means, we connect each vertex of a prism (say, A) with this center P by a segment (AP in this case) and extend that segment further behind a center P by a length of this segment, getting a centrally symmetrical point. In this case a new point D' will be symmetrical to point A and a new point D will be symmetrical to point A', while all other vertices will be symmetrical among themselves: B - to C' and C - to B'.

Prisms ABCA'B'C' and BCDB'C'D' are symmetrical and, therefore, congruent and have the same volume. But, considered together as an object ABCDA'B'C'D', they form a parallelepiped. It follows from the properties of central symmetry of transforming lines to lines, planes to planes, segments to segments of equal length and angles to angles of equal measure. We leave the details of this proof to students and will be happy to include it into this writing with all the credentials if submitted.

Now, since our original triangular prism is a half of parallelepiped ABCDA'B'C'D', its volume VTprism is also a half of the volume of this parallelepiped VPped, which is equal to a product of the area of its base SPped by its altitude H:
VPped = SPped·H
Therefore,
VTprism = (1/2)·SPped·H
But, since area of the base of our triangular prism equals to a half of the area of parallelogram ABCD,
STprism = (1/2)·SPped
and, therefore, we came to the same formula for a volume of a triangular prism, that is it's equal to a product of the area of the base by the altitude:
VTprism = STprism·H

Tuesday, July 21, 2015

Unizor - Geometry3D - Symmetry - Congruence





Unizor - Creative Minds through Art of Mathematics - Math4Teens

The purpose of this lecture is to prove that symmetrical objects in three-dimensional space are congruent.

Mini-theorem 1
A centrally symmetrical counterpart to a segment is a segment of the same length.

Mini-theorem 2
A counterpart to a segment reflected relatively to a plane is a segment of the same length.

Mini-theorem 3
A centrally symmetrical counterpart to a triangle is a triangle congruent to the original.

Mini-theorem 4
A counterpart to a triangle reflected relatively to a plane is a triangle congruent to the original.

Mini-theorem 5
A centrally symmetrical counterpart to an angle is an angle congruent to the original.

Mini-theorem 6
A counterpart to an angle reflected relatively to a plane is an angle congruent to the original.

Mini-theorem 7
A centrally symmetrical counterpart to a dihedral angle is a dihedral angle congruent to the original.

Mini-theorem 8
A counterpart to a dihedral angle reflected relatively to a plane is a dihedral angle congruent to the original.

Let me add more philosophical statement that is based on the above theorems.
Since
most of complex three-dimensional objects contain elements discussed
above (like pentagon consists of five segments and five angles,
parallelepiped consists of six parallelograms and eight dihedral angles
etc.), these complex objects are transformed into congruent ones by a
transformation of symmetry (central or relative to a reflection plane).

Monday, July 20, 2015

Unizor - Geometry3D - Plane Reflection





Unizor - Creative Minds through Art of Mathematics - Math4Teens

Plane reflection in three-dimensional space assumes the existence of a fixed plane of reflection.

To construct a point A' reflectively symmetrical to a given point A relatively to a plane of reflection γ, we have to drop a perpendicular from point A onto plane γ and extend it beyond the base point by the same length.

Based on this construction, it's easily observed that the process is reversible. If we start from point A', drop a perpendicular to the same plane γ and extend it by the same length, we will arrive to the original point A. We can say, therefore, that the process of reflection is reflexive, that is, if point A' is a reflective image of point A relative to plane γ, then point A is a reflective image of point A' relative to the same plane γ.

Theorem 1
A reflectively symmetrical counterpart of a straight line is a straight line.

Theorem 2
A reflectively symmetrical counterpart of a plane is a plane.